Does Swiffer Have Batteries? All You Need To Know

Does swiffer have batteries?  Yes, your Swiffer usually requires 4 AA batteries.  To remove the battery panel, click the notch inside the area where the cleaner is located.  Open the cover and insert the batteries.

Does Swiffer Have Batteries?

YES! Swiffer Wetjet uses 4 AA batteries.  You can use disposable or rechargeable AA for more environmentally friendly cleaning.  I like to use Duracell or Energizer batteries because I think they work better than cheaper alternatives to powered devices like the Wetjet. 

It seems that replacing the batteries on a device like the Wetjet should be easy.  But in many cases, people find it difficult to understand how to change the device’s batteries or how to add batteries in the first place.  Let’s take a look at the process of replacing the batteries on the Swiffer Wetjet and look at the steps to make it easy.

Parts of a Swiffer WetJet

The Swiffer WetJet is essentially a mop that consists of six main parts: a handle, a cleaning solution, floor parts, cleaning pads and batteries.  In this way, this WetJet provides powerful floor cleaning with a detergent fixed inside the washing system in an airtight bottle that cannot be opened.  Although these WetJets are available in a wide range, you can use them for easy cleaning of wood, tile, laminate, linoleum or vinyl floors, read this Best Swiffer For Concrete Floors page to learn more.

 How To Change Swiffer Batteries

If you bought a Wetjet kit, your Wetjet must have 4 AA batteries to get started.  Remove them or prepare replacement batteries.

Open the battery compartment and load the batteries

Apply Wetjet to the floor.  Look at the top of the device.  You should see a piece of plastic at the top of the device that has a semicircular curve with two lines and an arrow.  Click on the line and slide the part up to the top of the device handle.  The entire battery compartment will be separated from the Wetjet handle.  Turn it over and you will see a compartment with space for four batteries – two on each side.

See also  Best Roomba with Mop

Insert your AA batteries into the holder

Insert the AA batteries into the holder.  Make sure that the flat part of the batteries (negative side) is pressed into the spring on each side of the compartment.  Again, each side of the compartment contains two AA batteries.

Insert the battery compartment back into the Wejetet

Now turn the battery compartment over, align it with the Wejetet handle and insert it back, making sure that the semicircular top of the compartment matches the semicircular area of ​​the Wetjet handle.  When it is fully inserted, the battery compartment should click.  Congratulations, batteries replaced, and done!

Finding out how to change Wetjet batteries the first time can be annoying.  It is unclear where the battery compartment is located, and it is easy to forget after you have used the device for some time.  But once you remind yourself of the process, it is not difficult and will not take more than a few minutes.

What Batteries Does Your Swiffer Wet Jet Need?

Swiffer WetJet usually requires 4 AA batteries.  So whenever you need to buy new batteries for your Swiffer, always buy AA alkaline batteries.  However, these batteries are recyclable.  Therefore, when you replace the batteries, recycle the old ones and store them in a cool, dry place.  However, replacing only 2 batteries with new ones can work.  This is especially useful if you have batteries left at home.

If you want to clean without thinking about batteries, every time you can think about buying a steam mop, see the difference between wet and steam mops here

How to Refill Swiffer Wet Jet? ‎

Although the Swiffer Wet Jet is used, it comes in an airtight plastic bottle that cannot be opened.  Each time the bottle runs out of liquid, you must purchase a new bottle of detergent, as no other bottle fits in the Swiffer.

See also  Best Swiffer For Cat Hair

If you do not want to buy a new bottle of cleaning solution, we can teach you an easy way to fill this bottle with your own cleaning solution. It is important to note that this method of filling requires a plug, such as a plug or other type of plug, drill and drill bit.

  • The first step is to drill a hole the same size as your plug. When drilling, it is likely that pieces of plastic may get inside the bottle.  Then shake the bottle to make sure there are no pieces left inside.
  • The second step is to fill the container with your favorite cleaner and plug the hole with a plug or other stopper. Congratulations, you have created a reusable cleaning container.  You can use it for a long time, but from time to time you will have to change the plug or stopper.  Although you can store it for a long time, I would suggest buying a fresh bottle every 6 months or every year.  You can also buy a refueling package.

How To Assemble Swiffer Wetjet

  • Unfold the Swiffer Wet and remove the sticky tape from all parts.
  • Connect the pole, mop, middle rod and handle.
  • Look for a notch inside the area that contains the cleaner and click it to remove the battery panel. Open the lid and insert 4 AA batteries into your Wet Jet.
  • Insert the liquid cleaner. Find the liquid cleaner in the box and turn the Wet Jet upside down.  Place the flat side of the cleaner against the Wet Jet post and push the bottle up into the holder.  Wait for the click to indicate that the liquid cleaner bottle is inserted correctly.
  • The next step is to put on a cleaning pad. Remove the two strips of paper from the pad and place the sticky side on the bottom of the Wet Jet, place the mop on the pad and wait a few seconds for the cushion to stick automatically.

CONCLUSION

Swiffer Wet Jet is a great little vacuum cleaner that uses water and detergent to clean hardwood, tile and linoleum floors.  It’s an easy-to-use tool that easily cleans up spills and crumbs with this great cleaner.  The machine uses disposable cloths that work with a cleaning solution that collects dirt and grime during washing.  The pad also has a cleaning layer in one corner to pick up any sticky debris.

See also  How to Connect Roomba to Alexa

A stream of water sprays soap on the floor to remove dirt from the floor.  It also comes with a removable cleaning brush for more complex stains or spills on the floor.  When cleaning, it leaves behind a fresh scent of pine for the atmosphere of your home.

This product can be used on all types of hard floors, including laminate, vinyl, marble, granite and other stone surfaces, without damaging them.  You can remove any excess moisture left by the machine using an absorbent towel or cloth after washing the floor so that they dry faster than usual.

Does Swiffer Have Batteries FAQs

Why doesn’t my swivvel sweeper work?

Swivel Sweeper runs sluggish or does not start: make sure the battery is fully charged and securely inserted in the Battery Compartment, and the pole section with the Battery Compartment is securely connected to the Pole Base.  The rotary sweeper works, but does not collect a mess: the “dirt tray” can be filled.

What do you do when your Swiffer Wet Jet stops working?

Check the bottle to make sure it is fully inserted if the spray does not work.  Insert the bottle completely and securely.  Make sure the batteries are inserted correctly.  Replace old batteries with new ones if the engine does not run after checking the solution vial and batteries.

Where are the batteries on the Swiffer Wet Jet?

The batteries are located at the top of the switch in the 4 aa compartment.  It is located behind the water tank.  The water tank is removed from the Swiffer handle.  You will see a panel that you can open.  Buy 4 AA batteries and replace them.

Why doesn’t my Swiffer Wetjet spray?

Check the bottle to make sure it is fully inserted if the spray does not work.  Insert the bottle completely and securely.  Make sure the batteries are inserted correctly.  Replace old batteries with new ones if the engine does not run after checking the solution vial and batteries.

Please share this